 |
|
LION'S DENTAL SUPPLY & EQUIPMENT
|
|
Quality Dental Lasers, Equipment & Supplies...All at the Lowest Prices!!
|
|
|
 |
|
|
|
|
|
Dental Air Abrasion System |
|
|
AQUACUT “QUATTRO” (Velopex) The NEW approach to preventative and conservative
dentistry! The AQUACUT’s unique fluid
curtain suppresses the powder emissions common with air abrasion
units from the past, while simultaneously increasing cutting
efficiency by constantly removing debris created during the cutting
process. The use of fluid reduces the need for high air pressure
levels, thereby increasing patient comfort. So how is it used? … When your
patient sits down in the dental chair, you are able to perform a
fast and effective cleaning of the oral area. This will present you
with a clearer indication of the patient’s dental condition.
At the turn of a switch, … the AQUACUT changes into a
powerful cutting tool that will in many instances cancel the need
to use the dental turbine. It is a non-contact instrument,
there is no vibration, heat generation or turbine noise. most cases
there is no need for an anesthetic. |
|
What is fluid/air abrasion ?
The Aquacut Quattro is a unique new
patented generation of cutting
tool, taking the original concept of air abrasion and with the
addition
of fluid, creating Aquabrasion, a far more efficient and gentle
technology.
Besides functioning as a cutting tool, the Aquacut also cleans,
polishes
and dries. Advantages of the Aquacut Quattro:
Conservative, tooth-friendly
dentistry. No chipping or stress fractures,
and minimal removal sound tooth material Quick and versatile – reduced
treatment times Multiple quadrants treatable on a
single visit A must for modern adhesive dental
techniques Ability to cut, polish, clean and
dry Incorporates advanced patented
technology
|
|
|
|
POWDER
MANAGEMENT SYSTEM Sealed, self-contained disposable powder
cartridges allow quick and measured refills. An inbuilt feed system
insures there is zero maintenance in this critical area as the
cartridges can simply be removed and replaced. This system also
allows for a quick change between powder grades. Powders are available in 53 micron (red cartridge) and 29
micron (blue cartridge) of Aluminum Oxide for cutting or a Sodium
Bicarbonate powder (clear cartridge) for cleaning and
polishing. |
HANDPIECES With performance in mind, the ergonomic design allows for
comfortable operation in the hand and mouth without sacrificing
accuracy or control. The low resistance nozzle and long-life
tungsten tip ensures the handpiece is a high performance precision
instrument. The Autoclave-safe handpiece is made more versatile
with a quick release system and comes in two tip sizes: .
I/ASS8090A - BLUE 0.5MM, I/ASS8092A - GOLD 0.8MM, I/ASS8089A -
GREEN 0.4MM and I/ASS8091A - SILVER 0.6MM Air pressure and powder
levels are quickly calibrated through a simple-to-use control panel and
a powder
selection switch allows instant change from cutting to
polishing.
The unique foot control enables the operator to choose instantly
any function, enabling all procedures to be carried out through a
SINGLE handpiece, thus speeding up treatment and reducing
fatigue. |
|
|
|
AQUACUT QUATTRO
SPECIFICATIONS
External
Supplies: Clean, dry, compressed air, 6 bar (90psi) minimum,
7.5 bar (110psi) maximum. Inlet air supply connection Ø 4mm push-in
fitting.
Foot Control:
Three-way multi-functional foot valve for cut, wash and dry
control. 2m (6ft), three-core pneumatic supply tube.
Output Pressure:
Infinitely variable cutting/polishing air pressure between 0 - 7
bar (100psi), controllable via rotating switch and pressure
gauge.
Cutting Media:
53 and 29 micron Aluminium Oxide. Powder rate infinitely variable
between 0 and 6g / min (0.2oz) via rotating switch and pressure
gauge.
Polishing
Medium: Sodium Bicarbonate.
Handpiece:
Anodised Aluminium with separate integral powder and fluid channels
(both operated by foot control). Nozzles
made
from stainless steel tube with Tungsten Carbide tip. Handpieces
incorporate quick release system for
convenient
changeover of cutting sizes.
Colour coded handpieces for simple tip-size identification:
Silver - 0.6mm (supplied with the Aquacut QUATTRO)
Purple - 0.3mm (optional extra)
Green - 0.4mm (optional extra)
Blue - 0.5mm (optional extra)
Gold - 0.8mm (optional extra) Product
Brochure
|
|
|
AQUACUT COMPRESSOR (VELOPEX) reg $ 1,759 SALE $ 1,415
PRICE DROP ALERT
AQUACUT OIL-LESS COMPRESSOR (VELOPEX) reg $ 1,429 SALE $ 999
|
|
|
|
 |
 |
|
 |
|
